manualshive.com logo in svg

CONVEY-ALL 1214-GN, Руководство оператора

Поделиться
Скачать
CONVEY-ALL 1214-GN Скачать руководство пользователя страница 37

4-3

Revised 02.2021

Operator’s Manual: Transfer Conveyor

4.2  SERVICING INTERVALS

Use the Service Record provided on page 4-13, 
to keep a record of all scheduled maintenance.

The conveyor belt alignment is preset to run 
true under a condition of no load. It is important 
to check alignment and make adjustments, if 
required, during the initial few minutes of loaded 
operation.

Check bearings for wear daily.

The following recommended periods are based 
on normal operating conditions. Severe or 
unusual conditions may require more frequent 
lubrication and oil changes.

Schedules may vary depending on options and 
engine model contained in the present unit.

IMPORTANT:

For engine servicing and maintenance,

refer to its manual for complete details.

4.2.1  Every 10 Hours or Daily:
Gas Engine Units:

1. Check fuel level on units with gas engine.

- Add as required.

2. Check oil level on units with gas engine.

- Add as required.
-

All Conveyors:

3. Inspect conveyor belt lacing for wear.

4. Check the conveyor belt tension daily while
breaking-in the conveyor.

- Refer to Section 4.2.2

5. Check the conveyor belt alignment frequently 

during the first 10 hours of operation until it
seats itself. Refer to Section 4.2.2

Fig 36 - Gas engine

Fig 37 - Transition roller bearings

Fig 38 - Discharge roller bearings

6. Inspect all rollers and bearings for play and

wear.
- Replace if necessary.

Содержание 1214-GN

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды