ControlByWeb X-600M, Руководство пользователя

Страница: 59 / 158

X-600M Users Manual Setup Pages
the device. By selecting IP Address, the X-600M will connect directly to the device. By selecting
Remote Services, the X-600M will wait for the remote device to connect to it. For this to work, the
remote services server needs to be enabled on the X-600M, and the remote device needs to
configure remote services to connect to the X-600M. By selecting Xytronix Compact Data Protocol
(XCD), the X-600M will listen for message coming from devices configured to use the XCD protocol.
(The XCD protocol is a non human readable protocol with small packet sizes that is used with
battery operated wireless devices such as the XW-100 and XW-111.)
Password:
If an Ethernet-enabled device requires a password, enter that password here.
Diagnostic Email Recipient:
When a user or group of users is selected to receive diagnostic message, emails will be sent to
notify the users when the device is unresponsive. Emails will also be sent to notify users when
battery operated devices have low batteries (lower than 15%).
Refresh Rate:
This field determines how fast the X-600M will poll devices to retrieve the current status of the
device's I/O. By default this field is three seconds for Ethernet devices and one second for
expansion modules. Devices on the expansion bus that have digital inputs will update whenever the
digital inputs change state, not just when the refresh rate indicates it is time. This allows digital
inputs state changes to be more responsive.
4.3.1 Devices > Find New Devices
When expansion modules are first connected to the X-600M ribbon cable connector, each of the
modules must be registered and programmed with an internal expansion bus device address. This can
be done by clicking the
Find New Devices button. At the same time the X-600M scans its same subnet
for the presence of other ControlByWeb devices and scans for attached USB to Serial port adapters. All
of the discovered devices appear in a list.
To add a device (register it), click the device's Add button. Special care is needed when adding
expansion modules if there are more than one of the same model. In this case you must pay special
attention to the serial number field in order to determine which specific device you are adding. The serial
numbers are marked on the labels of the expansion modules.
Xytronix Research & Design, Inc. Page 57