X-600M Users Manual
Setup Pages
control remote relays belong to the CBW group. This means in this example that a ControlByWeb
device that is configured to control a remote relay on the X-600M, can only control relay 3, relay 4, relay
6, or relay 7.
Another thing to mention is that each access group has a read/write setting. In the previous example,
each group was configured for read and write, meaning that the I/O belonging to those access groups
could be monitored and controlled by the users in those same access groups. If, on the other hand, the
User access group was configured as a read only access group, then Jennifer, Ryan and Mike would
only be able to monitor relay 2, relay 4, relay 5, and relay 6. No control would be available.
4.1.2 System > User Accounts (Add, edit, and delete user accounts)
The X-600M can support up to 250 individual
User A
ccounts. Each user account is shown in a separate line.
Click
Add New User
to create a new user account. The settings and passwords for each user account can
be changed by clicking the
Edit
icons.
Each user is assigned a password and one or more
Access Groups
(enable
Dashboard and I/O
Password Protection
under the
System > Overview
menu tab in order to view and change
Access
Group
settings)
.
Users who are assigned to an access group will have access to any I/O and
dashboards that also belong to that particular access group.
Users
have passwords,
Groups
do not.
Note:
Email alerts can be sent to users (or groups) - These users can be set up to receive email alerts
only while having no access to the dashboards and I/O.
Xytronix Research & Design, Inc.
Page 33
Содержание X-600M
Страница 1: ...X 600MTitle Page Goes Here...
Страница 6: ...X 600M Users Manual Page 4 Xytronix Research Design Inc...
Страница 99: ...X 600M Users Manual Setup Pages Xytronix Research Design Inc Page 97...
Страница 116: ...Appendix B Installing New Firmware X 600M Users Manual Page 114 Xytronix Research Design Inc...