Contrec 515, Руководство по эксплуатации

Страница: 44 / 92

Instrument Calibration
36 515 HC04 - 8 June 2007
Filter setting A Seconds to reach 90%
of full swing Seconds to reach 99%
of full swing
0 0 0
2 2 4
4 4 8
6 5 10
10 8 15
15 12 23
20 14 27
25 18 34
35 25 48
45 32 62
60 42 82
75 52 102
90 62 122
99 68 134
The input filter range is from 0 to 99. A setting of 0 (zero) means that
there is no filtering.
CORR AINP3
AINP4
Analog input non-linearity can be corrected as follows:
•
LINEAR
•
NON-LINEAR to use the following linearity correction parameters
Use or to select LINEAR or NON-LINEAR.
NO-PTS AINP3
AINP4
This parameter is available for viewing and editing only when the
correction type is set to Non-linear.
Enter the number of non-linearity correction points.
Press or to select a number between 1 and 20 for the number
of correction points.
↓ →
UNITS PARAMS
INPUTS
OUTPUTS ALARMS COMMS TM/LOG SETUP TEST END
SET