manualshive.com logo in svg

Contrec 515, Руководство по эксплуатации

Поделиться
Скачать
Contrec 515 Скачать руководство пользователя страница 34

Operation

26

515 HC04 - 8 June 2007

Model Information

The model information items display the hardware, software and 
application versions of the instrument. This information is mainly for 
service personnel.

Press 

 at any time to exit from the Model information.

↓

Description

-11-F-

515 MODEL

The hardware model code. Refer to 

Product Codes

 

on page 75 for more information.

--ttLH

HC04 INPUT

The Application number and the assignment of the 
inputs. Refer to 

Application Information Code

 on 

page 76 for more information.

0101.002

HC04 VERS

The version of software loaded into the instrument.

026357

CUSTOM VERS

The Customer version code for this installation. Refer 
to 

Custom Version Codes

 on page 76 for more 

information.

123456

ABC123 S/N

The instrument serial number and unit tag. The serial 
number is on the top line and unit tag is on the bottom 
left. Both items are entered when the instrument 
application software is initially loaded. If the unit tag 
is not used the default tag, 

UNIT

, will be used.

 16-15

EDITED 27/08

      2002

The time and date when the calibration of the 
instrument was last edited. The format of the time and 
date is the same as for the data logs. This example 
shows 16:15 (4:15pm) on the 27th August 2002. 

This function is available only if the instrument has 
the real time clock option.

DISPLAY

SET

Содержание 515





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды