ARCHITECTURAL AND ENGINEERING SPECIFICATION, v 2.7
10
F. The system shall have true 32-bit multi-tasking and multi-user capability.
G. Independent activities and monitoring shall be able to occur simultaneously at different
locations.
H. The system must allow for Time Zone offsetting.
I. The Host system shall be user friendly with a minimum learning curve (1 day on
average). It shall employ Microsoft Windows
®
user interface characteristics such as pull
down menus.
1.14. SUBMITTALS
A.
Shop Drawings:
Provide complete shop drawings which shall include the following:
1. Indicate all system device locations on architectural floor plans. No other
system(s) shall be included on these plans.
2. Include full schematic wiring information on these drawings for all devices. Wiring
information shall include conductor routing, quantities, and connection details at
devices.
3. Include a complete access control system one-line, block diagram.
4. Include a statement of the system sequence of operation.
B.
Product Data:
Provide complete product data which shall include the following:
1. Manufacturer’s data for all material and equipment, including controllers, local
processors, computer equipment, access cards and any other equipment
provided as part of the ACS.
2. A system description, including analyses and calculations used in sizing
equipment required by the ACS. Description to show how the equipment will
operate as a system to meet the performance requirements of the ACS. The
following information shall be supplied as a minimum:
i. Central processor configuration and memory size
ii. Description of site equipment and its configuration
iii. Protocol description
iv. Hard disk system size and configuration
v. Backup/archive system size and configuration
vi. Start up operations
vii. System expansion capability and method of implementation
viii. System power requirements and UPS sizing
3. A description of the operating system and application software.
C.
Functional Design Manual:
The functional design manual shall identify the operational
requirements for the system and explain the theory of operation, design philosophy, and
specific functions. A description of hardware and software functions, interfaces, and
requirements shall be included for all system operating modes.
