Continental Access CADV-H-SR08 EH-Series, Руководство пользователя

Страница: 85 / 99

User’s Manual
74
Appendix B ─ Reviewing Video Clips
You do not need to install any special software on your personal computer to review the video clips. The
copied video clip contains the ClipPlayer program.
If you used a USB device, disconnect either the external USB-IDE hard disk drive or USB flash drive
from the DVR, and connect it to your PC. If you used a recordable CD, insert the CD in your computer’s
CD drive. Double-clicking the target clip file starts the ClipPlayer program.
NOTE: It is suggested that the computer used for the ClipPlayer program has at least an 800MHz
Pentium III. If your CPU is slower than this, video clips recorded at maximum speed with very high
image quality will be played back slowly. Also DirectX 8.0 or higher is required to run Clip Player,
and a VGA card with 16MB or more video RAM is recommended for proper operation.
Figure 96 ─ ClipPlayer screen.
The
ClipPlayer Screen displays the clip images.
NOTE: Proper image display depends on the display settings of your PC. If you are experiencing
display problems, click the right mouse button on the background screen and select Properties
Æ
Settings then set the Color quality to “ 32 bit ”. Then select Advanced Æ Troubleshoot and set
Hardware Acceleration to “ Full ”. Please make sure that DirectX version 8.0 or higher has been
installed if the display problem continues to occur. To check the version of DirectX, click Start Æ
RUN and type “dxdiag” and press the enter key. The DirectX Diagnostic Tool dialog box will
display. Then move to the Display tab and make sure
DirectDraw Acceleration is set to “ Enabled ”.
Test the DirectDraw by selecting the DirectDraw Test button. After changing the settings, update
the driver version of the VGA card. If you still have display problems after changing all display
settings as described above, try replacing the video card. Video cards with an ATI chipset are
recommended.