Continental Access CADV-H-SR08 EH-Series, Руководство пользователя

Страница: 21 / 99

User’s Manual
10
ALARM Button
The
ALARM
button has two functions. First, it will reset the DVR’s outputs including the internal buzzer
during an alarm. Second, it will display the event log when you are in the live monitoring mode unless
there is an active alarm. This operation can be user password protected.
PANIC Button
Pressing the
PANIC
button starts panic recoding of all camera channels, and displays on the screen.
Pressing the button again will stop panic recording.
Turning on the Power
Connecting the power cord to the DVR turns on the unit. The unit takes approximately 60 seconds to
initialize.
Initial Unit Setup
Before using your DVR for the first time, you will want to establish the initial settings. This includes
items such as time and date, display language, camera, audio, remote control, record mode, network and
password. Your DVR can be set up using various screens and dialog boxes.
Throughout the screens you will see . Highlighting the and pressing the (Play/Pause) button
gives you the opportunity to reset that screen to its default settings.
Press the
MENU
button to enter the setup screens. The
Login
screen appears.
NOTE: To assure the secure management of the system, setting up a password is strongly
recommended.
NOTE: You can use a mouse (not supplied) to access the Login screen in addition to using the
front panel buttons. Click the right mouse button to display the Login screen. To enter a
password, click the
…
button, and the virtual keyboard displays. See instructions below for using
the virtual keyboard.
Figure 4 ─ Login screen.
Select a User and enter the password by pressing the appropriate
combination of Camera number buttons and then the button.
There is no default password when logging in the
admin user for the
first time.