Continental Access CADV-H-SR08 EH-Series, Руководство пользователя

Страница: 67 / 99

User’s Manual
56
In active cameo mode, press the button for the camera you want to display in the active cameo. After
setting the camera number to active cameo, the DVR moves the active cameo to the next cameo. When
the camera number exists on the current screen, the active cameo is changed with the existing camera
number. When the camera number does not exist on the current screen, the active cameo is replaced by
the camera number. You can change the screen layout in this way.
Freeze Mode
Pressing the (Play/Pause) button will freeze the current image on the screen until you press the button
again. While in the Freeze mode, the icon displays in bottom-left corner if
Freeze is selected in the
Display setup screen (OSD tab).
Zoom Mode
You can enlarge an area of the video by pressing the
ZOOM
button. For a few seconds after pressing the
ZOOM
button, a rectangle displays on the screen. A rectangle shows the area that will be enlarged. You
can move the rectangle around using the arrow buttons. Pressing the (Play/Pause) button in the Zoom
mode enlarges the area in rectangle. Exit the Zoom mode by pressing the
ZOOM
button. While in the
Zoom mode, the icon displays if
Zoom
is selected in the Display setup screen (OSD tab).
Image Adjustment
NOTE: It is important that cameras and monitors are correctly installed and adjusted prior to
making any image adjustments using the DVR’s controls.
If a user who has
Color Control authority logs into the system, the user can adjust the image. Pressing
and holding a camera button for a few seconds displays an image adjustment dialog. You can control
brightness, contrast, hue and saturation for each camera.
NOTE: Any image adjustments you make will be applied to both the live video on the monitors
and the recorded video.
Sequence Mode
Pressing and holding the
SEQUENCE
button for two seconds or longer causes the cameras to display
sequentially. When in one of the multi-view formats, pressing this button will cause the DVR to go
through predefined screen layouts (Full Sequence). Or, the bottom, right screen will display live cameras
sequentially (Cameo Sequence). Pressing the
SEQUENCE
button again for two seconds or longer exits
the Sequence mode. When in one of the multi-view formats, pressing the
SEQUENCE
button will cause
the DVR to go to the next page. For example, if you press the
SEQUENCE
button in the 2x2 format, the
DVR changes pages as follows:
If all the cameras in a page are Off, have lost video or are set to Covert (unless the user has authority to
view covert cameras), that page will be excluded from the sequence.
NOTE: The Full Sequence for the full sequence monitoring and the Cameo Sequence for the
cameo sequence monitoring should be selected in the Display setup screen (Sequence tab).