PILOT-192PRO
- 192-channel DMX controller with joystick and USB port
Page 6
English
5 -
Press the
TAP/DISP
button to select the
PH
(8 bits) or
PL
(16 bits).
Select the
"PH.XX"
, long press the
MODE
button and short press the scene button corresponding the PAN
channel of your projector.
Press the
TAP/DISP
if your projector has a 16-bit PAN mode, and then display will indicate
PL.XX
. Long press
the
MODE
button and short press the button corresponding to the PAN channel of your projector.
6 -
Press one of the
BANK
buttons to choose the
TH
(8 bits) or
TL
(16 bits) displayed on the screen.
Select the
"TH.XX"
, long press the
MODE
button and short press the scene button corresponding to the
number of the PAN channel of your projector.
Press the
TAP/DISP
if your projector has a 16-bit TILT mode, and then display will indicate
PL.XX
. Long press
the
MODE
button and short press the button corresponding to the TILT channel of your projector.
7 -
Press the
PROGRAM
button for 2 seconds until the
prog
indicator on the display flashes. The flashes indicate
the Program mode is activated and the button can be released.
5 - Deleting the PAN and TILT assignation of the joystick
A - DELETING THE JOYSTICK ASSIGNATION FOR SOME OF YOUR PROJECTORS
1 -
Press the
PROGRAM
button for 2 seconds until the
prog
indicator on the display flashes. The flashes indicate
the Program mode is activated and the button can be released.
2 -
Long press the
MODE
button and short press the
FINE
button. The
"Assign"
and
"PAN"
LEDs will start
flashing.
3 -
Select the desired projector by pressing the corresponding
PROJECTORS
button. The LED of the projector
will turn on.
4 -
Long press the
MODE
button and short press the
AUTO/DEL
button to erase the parameters of the selected
projector. All the LEDs of the PILOT-192PRO will flash 3 times to confirm the suppression.
5 -
Press the
PROGRAM
for two seconds until the
Prog
indicator stops flashing. The
Black-out
will then flash,
indicating the PAN and TILT parameters have been deleted.
B - DELETING THE PAN/TILT PARAMETERS OF THE JOYSTICK FOR ALL YOUR PROJECTORS
1 -
Use the power switch of the rear panel to turn off the PILOT-192PRO.
2 -
Simultaneously press the
AUTO/DEL
and
MODE
button, then turn on the PILOT-192PRO with the power
switch. All the LEDs will flash 3 times to confirm the suppression.
