PILOT-192PRO
- 192-channel DMX controller with joystick and USB port
Page 16
English
5 -
Click on Select Ulink in the upper right corner of the Usave software interface.
6 -
Click on "receive file". A dialogue window will open, allowing you to indicate the destination folder. Enter
the name of the folder you want to create (A message will then appear on your computuer, indicating "waiting
receive data").
7 -
Simultaneously press the
SCENES 7
and
SCENES 8
buttons of your PILOT-192PRO. The data transfer will
start immediately. The display will indicate "Out" during the data transfer. "101" will be displayed at the end
of the transfer to indicate it was successful. (Press SCENES 1 during the transfer to restart the transfer.)
21 - USB cable: Transferring data from your computer to your console
These instructions will allow you to transfer data from your computer console to your PILOT-192PRO.
You will be required to install the software and pilots supplied with your USB cable.
1 -
Connect the USB plug (beside the green LED) to the USB socket of your computer, and the other end to
your PILOT-192PRO.
2 -
Turn
your console off via the power switch at the rear.
3 -
Simultaneously press the
PROJECTORS 2
,
PROJECTORS 3
, and
SCENES 2
buttons and turn your console ON.
4 -
Open Usave by clicking on the Start menu of your computer, then All programs, and Usave.
5 -
Click on Select Ulink in the upper right corner of the Usave software interface.
6 -
Click on "Send File". A dialogue window will open, allowing you to indicate the file you want to transfer to
your console. The transfer will start immediately after you have selected a file. During the transfer, the display
will indicate "reCe" (receiving). "101" will be displayed at the end of the transfer to indicate it was successful.
22 - USB key : Transferring data from your console to your USB key
These instructions will allow you to transfer data from your PILOT-192PRO to your USB key.
There are 8 folders available, for a maximum of 128 mb. You will be required to install the software and pilots
supplied with your USB cable.
1 -
Connect the USB key to the USB socket of your console.
2 -
Turn
your console off via the power switch at the rear.
3 -
Simultaneously press the
PROJECTORS 8, PROJECTORS 9, SCENES 1
and turn your console ON.
Your USB key has not been installed properly if
"Fail
" appears on your console screen.
NB : The "
noP
" message indicates the USB key does not contain any file, the 8 folders are thus available to
store data.
The "
fl0x
" message indicates the folders containing datas, x being the 1 - 8 folders. You can use the
BANK
or
buttons to access more folders on the USB key.
If the folder number (x) is below 8 and you cannot create more folders, it means the USB key is full and
cannot receive any extra files.
You must erase one of the folders if you already have created 8 folders. Please make sure to keep a copy on
