PILOT-192PRO
- 192-channel DMX controller with joystick and USB port
Page 12
English
C - DELETING A SEQUENCE
1 -
Press and hold the
PROGRAM
button for 2 seconds, until the
Prog
indicator flashes to indicate the Prog
mode has been activated.
2 -
Use the
CHASE
button (1 to 12) to select the sequence you want to erase.
3 -
Simultaneously press the
AUTO/DEL
button
and the
CHASE
button corresponding to the sequenced selected
during step 2. All the LEDs will flash 3 times to confirm your choice.
4 -
Repeat steps 2 and 3 to delete more sequences.
5 -
Press the
PROGRAM
button for 2 seconds to leave the Program mode once all your steps have been
programmed. The
Black-out
indicator will flash to confirm you have left the Program mode.
D - DELETE ALL SEQUENCES
1 -
Use the power switch of the rear panel to turn off the PILOT-192PRO.
2 -
Simultaneously press the
AUTO/DEL
and
BANK
buttons, then turn on the PILOT-192PRO with the power
switch. All the LEDs will flash 3 times to confirm the suppression.
15 - Playing a sequence
A - MANUAL TRIGGER
1 -
The default program is the manual/black-out mode. All outputs are in black-out mode. The console is
in manual mode if the black-out light indicator of the display is not flashing. Press the
BLACK-OUT
button to
switch from black-out mode to manual mode.
2 -
Use the
CHASE
button (1 to 12) to select the sequence you want. The LED of this sequence will light on.
3 -
Use the
BANK
or
buttons to browse through the steps included in your sequence.
You can also use the fade time to integrate crossfade transitions between your steps.
4 -
Repeat steps 2 and 3 to play more sequences manually.
B - AUTO TRIGGER
1 -
Press the
AUTO/DEL
button, the
Auto Trigger
light indicator will then light on to confirm you are in Auto
Trigger mode.
2 -
Use the
CHASE
button (1 to 12) to select the sequence you want. The LED of this sequence will light on.
You can select several sequences.
3 -
You can adjust the speed and fade of the current scenes at any time (via the two
SPEED
and
FADE TIME
faders). Press the
TAP/DISP
button several times to create your own tempo. Press the
AUTO/DEL
button to
leave the automatic mode.
