PILOT-192PRO
- 192-channel DMX controller with joystick and USB port
Page 13
English
C - AUDIO TRIGGER
1 -
Press the
MUSIC/REC
button, the
Audio Trigger
indicator will light on to confirm the music-sensitive mode
has been activated.
2 -
Use the
CHASE
button to select the sequence you want. The sequence will switch to music-sensitive mode
thanks to the built-in microphone or the Audio Line input. Press the
MUSIC/REC
button again to leave the
music-sensitive mode.
16 - Copying banks or a projector
A - COPYING A BANK
1 -
Activate the programmation mode.
2 -
Use the
BANK
or
buttons to select the bank you want to copy.
3 -
Short press
MIDI/REC
and use the
BANK
or
buttons to select which bank will receive the copy.
4 -
Short press the
MUSIC/BKC
button. All LEDs will flash 3 times to confirm your choice.
B - COPYING
1 -
Activate the programmation mode.
2 -
Press the
PROJECTORS
button corresponding to the projector you want to copy.
3 -
Use the
faders
and
joystick
to program your projector.
4 -
Long press the same
PROJECTORS
button, then short press the
PROJECTORS
corresponding to the projector
which will receive the copy.
17 - Fade time
1 -
Press the
MODE
button, and simultaneously short press the
TAP/DISP
button. The display will indicate
Only
or
All
. Only means that only the PAN and TILT channels will be affected by the
FADE TIME
fader.
All
means
every channel will be affected by the
FADE TIME
fader.
2 -
Press several time the
TAP/DISP
button while pressing
MODE
to switch from
Only
to
All
at any time.
