PILOT-192PRO
- 192-channel DMX controller with joystick and USB port
Page 10
English
13 - Programming a sequence
The PILOT-192PRO features 12 sequences (chases). Each one of them can contain up to 240 scenes.
Here are the steps to follow to program one of these sequences:
1 -
Press and hold the
PROGRAM
button for 2 seconds, until the
Prog
indicator flashes to indicate the Prog
mode has been activated.
2 -
Use the
CHASE
buttons to select the sequence (chase) to be modified. The LED of the
CHASE
button will
light on.
3 -
Use the
BANK
ou
buttons to select the bank containing the scene you want to add to your sequence.
The current bank of scene is indicated by two digits in the right corner of the display.
4 -
Press the
MIDI/REC
button. All the LEDs will flash 3 times to confirm your choice.
5 -
Repeat steps 3 and 4 to program more steps.
6 -
Press the
PROGRAM
button for 2 seconds to leave the Program mode once all your steps have been
programmed. The
Black-out
indicator will flash to confirm you have left the Program mode.
Integrating an entire bank of scenes into a sequence
1 -
Press and hold the
PROGRAM
button for 2 seconds, until the
Prog
indicator flashes to indicate the Prog
mode has been activated.
2 -
Use the
CHASE
buttons to select the sequence (chase) to be modified. The LED of the
CHASE
button will
light on.
3 -
Use the
BANK
ou
buttons to select the bank you want to add to your sequence. The current bank of
scene is indicated by two digits in the right corner of the display.
4 -
Simultaneously press the
MUSIC/BKC
and the
MIDI/REC
buttons to incorporate the full bank. TAll the LEDs
will flash 3 times to confirm your choice. The scenes will be saved in the exact order of the bank.
5 -
Repeat steps 3 and 4 to add more bank of scenes in your sequence.
6 -
Press the
PROGRAM
button for 2 seconds to leave the Program mode once all your steps have been
programmed. The
Black-out
indicator will flash to confirm you have left the Program mode.
