PILOT-192PRO
- 192-channel DMX controller with joystick and USB port
Page 11
English
14 - Editing a sequence
A - ADDING A STEP TO A SEQUENCE
1 -
Press and hold the
PROGRAM
button for 2 seconds, until the
Prog
indicator flashes to indicate the Prog
mode has been activated.
2 -
Use the
CHASE
button (1 to 12) to select the sequence you want. The LED of this sequence will light on.
3 -
Press
TAP/DISP
, the Step light indicator will light on.
4 -
Use the
BANK
or
buttons to browse through the steps included in your sequence in order to spot the
step before which you want to integrate another step.
5 -
Press
TAP/DISP
to leave
.
The Step light indicator will no longer be lit on.
6 -
Use the
BANK
or
buttons to select the bank containing the scene you want to add to your sequence.
The current bank of scene is indicated by two digits in the right corner of the display.
7 -
Press the
MIDI/REC
button to add the chosen step to your sequence.
All the LEDs will flash 3 times to confirm your choice.
8 -
Repeat steps 3 to 7 to add more steps to your sequence.
9 -
Press the
PROGRAM
button for 2 seconds to leave the Program mode once all your steps have been
programmed. The
Black-out
indicator will flash to confirm you have left the Program mode.
B - DELETING A STEP FROM A SEQUENCE
1 -
Press and hold the
PROGRAM
button for 2 seconds, until the
Prog
indicator flashes to indicate the Prog
mode has been activated.
2 -
Use the
CHASE
button (1 to 12) to select the sequence you want. The LED of this sequence will light on.
3 -
Press
TAP/DISP
, the Step light indicator will light on.
4 -
Use the
BANK
or
buttons to browse through the steps included in your sequence in order to spot the
step you want to delete.
5 -
Press the
AUTO/DEL
button to delete the step from your sequence. All the LEDs will flash 3 times to confirm
your choice.
6 -
Repeat steps 4 and 5 to delete more steps.
7 -
Press the
PROGRAM
button for 2 seconds to leave the Program mode once all your steps have been
programmed. The
Black-out
indicator will flash to confirm you have left the Program mode.
