PILOT-192PRO
- 192-channel DMX controller with joystick and USB port
Page 4
English
15 - Program
Press the Program button for 2 seconds to enter/leave this mode.
16 - Music / Bkc
a
- Allows you to activate the music-sentive mode.
b
- Allows you to copy banks of scenes when the Program mode is activated.
17 - Midi rec
a
- Allows you to configure the MIDI channels
b
- Allows you to record scenes or sequences when the Program mode is activated.
18 - Auto/Del
a
- Allows you to activate the Auto mode to launch an automatic banks of scenes sequence.
b
- Allows you to delete scenes and sequences when the Program mode is activated.
19 - TAP / Display
a
- Allows you to set the duration between two scenes: the duration will be equal to the interval
between the two last pressure on the TAP / DISPLAY button.
b
- Allows you to to display real DMX values or their percentages when the Program mode is
activated.
20 - BLACK-OUT
Allows you to deactivates all DMX outputs without altering the current state of the projector.
3 -Rear panel description
1 - LABEL
Name of the product, serial number and date of manufacture.
2 - AUDIO
RCA socket allowing you to receive a line-level sound signal for a music-sensitive sequencing.
3 - DB9
Allows you to connect an external controller (such as foot controllers).
4 - MIDI IN
5-pin DIN socket: allows you to receive MIDI information.
5 - FOG CONTROL OUT
Use this socket to remote control a smoke machine.
6 - DMX OUT
3-pin XLR socket: DMX signal output.
7 - DC INPUT
+ 9~15V DC, 500mA minimum. We strongly recommend to only use the power supply unit supplied
with the PILOT-192PRO.
8 - POWER
Power switch.
9 - MIDI interface
MIDI signal output via USB port when the controller is used as a MIDI interface.
10 - USB indicator light
Displays the current status of the USB port.
11 - MIDI or DMX mode selection
Allows you to choose an operating mode. The controller must be restarted.
12 - MIDI OUT
5-pin DIN socket: allows you to send MIDI information.
Made in PRC
DC input:
9V-12VDC, 500mA Min
1 = Ground
2 = Data -
3 = Data +
POWER
DMX OUT
DC IN
FOG MACHINE
DB-9
EXT STEP CONTROL
AUDIO
Line Input 0.1V-1Vp-p
MIDI IN
5
3
2
4
1
1=NC; 2=NC
3=NC; 4=V+
5=Signal
MIDI IN
Serial Number:
1
2
3
4
5
6
7 8
