PILOT-192PRO
- 192-channel DMX controller with joystick and USB port
Page 17
English
your computer of the folder you want to erase.
4 -
Simultaneously press the
PROGRAM
button and the
SCENES
button corresponding to the folder number you
want to store in your USB key.
For instance, if you want to store folder #4, you will press
PROGRAM
and
SCENES #4
simultaneously.
(The
SCENES
1 to 8 buttons represent the 1 - 8 folders).
The console display will indicate "dAtA" (flashing) during the transfer. 101" will be displayed at the end of the
transfer to indicate it was successful.
23 - USB key : Transferring datas from your USB key to your console
These instructions will allow you to transfer data from your USB key to your PILOT-192PRO.
You will be required to install the software and pilots supplied with your USB cable.
1 -
Connect the USB key to the USB socket of your console.
2 -
Turn
your console off via the power switch at the rear.
3 -
Simultaneously press the
PROJECTORS 8, PROJECTORS 9, SCENES 2
and turn your console ON.
Your USB key has not been installed properly if
"Fail
" appears on your console screen.
Repeat steps 1 and 2 to try again.
NB : The "
noP
" message indicates the USB key does not contain any file, the 8 folders are thus available to
store data. You can create files on your USB key by using the Usave software.
The "
fl0x
" message indicates the folders containing datas, x being the 1 - 8 folders. You can use the
BANK
or
buttons to access more folders on the USB key.
Select the file you want to add to the console.
4 -
Simultaneously press the
PROGRAM
button and the
SCENES
button representing the folder number you want
to store in your console. The console display will indicate "dAtA" (flashing) during the transfer. 101" will be
displayed at the end of the transfer to indicate it was successful.
24 - USB key: Storing data from your USB key in your computer
These instructions will allow you to transfer data from your USB key to your PILOT-192PRO.
You will be required to install the software and pilots supplied with your USB cable.
1 -
Connect the USB key to one of the USB sockets of your computer.
2 -
Open Usave by clicking on the Start menu, then All programs, and Usave.
3 -
Click on Select Ustick in the upper left corner.
