PILOT-192PRO
- 192-channel DMX controller with joystick and USB port
Page 5
English
4 - Configuring the joystick
A - ASSIGNING THE JOYSTICK
1 -
Press the
PROGRAM
button for 2 seconds until the
prog
indicator on the display flashes. The flashes indicate
the Program mode is activated and the button can be released.
2 -
Press and hold the
MODE
button, the press the
FINE
button. The
Assign
and
Pan
LEDs will turn on.
3 -
Press the
PROJECTOR
(1 to 12) button to choose a projector and its LED will turn on.
4 -
Press the
TAP/DISP
button to select the
PH
o
PL
button displayed on the screen.
PH
refers to the 8-bit PAN movement.
PL
refers to the 16-bit PAN movement.
Select the
"PH.XX"
, long press the
MODE
button and short press the scene button corresponding to the
number of the PAN channel of your projector.
For instance:
if the PAN channel of your projector is channel 1, you will press the SCENE #1 button. Please refer to the list of DMX
values of your projector before using this function.
Press the
TAP/DISP
if your projector has a 16-bit PAN mode, and then display will indicate
PL.XX
. Long press
the
MODE
button and short press the button correspinding to the TILT channel of your projector.
5 -
Press one of the
BANK
buttons to select the
TH
or
TL
displayed on the screen.
TH
refers to the 8-bit PAN movement.
TL
refers to the 16-bit PAN movement.
Select the
"TH.XX"
, long press the
MODE
button and short press the scene button corresponding to the
number of the PAN channel of your projector.
Press the
TAP/DISP
if your projector has a 16-bit TILT mode, and then display will indicate
TL.XX
. Long press
the
MODE
button and short press the button corresponding to the TILT channel of your projector.
6 -
Press and hold the
PROGRAM
button for at least 2 seconds until the
prog
indicator stops flashing. The
Black-out
screen indicator will start flashing to indicate you are no longer in Program mode.
B - ASSIGNING THE JOYSTICK BY REVERSING PAN AND TILT
1 -
Press the
PROGRAM
button for 2 seconds until the
prog
indicator on the display flashes. The flashes indicate
the Program mode is activated and the button can be released.
2 -
Long press the
MODE
button and short press the
FINE
button. The
"Assign"
and
"PAN"
LEDs will start
flashing.
3 -
Repeat step 2. The
"reverse"
LED will turn on.
4 -
Select the desired projector by pressing the corresponding
PROJECTORS
button. The LED of the projector
will turn on.
