Contec SCP-8550-LLV, Руководство пользователя

Страница: 29 / 78

3. Hardware Installation
22
SCP-8550-LLV
Table 3.10. J5 connector : Primary IDE, FDD, PRINTER, SER1/2, Key/Mouse, USB5/6
Pin Z A B C D E F
22 GND RESERVED GND NC +5V RESERVED GND
21 GND KEY_DAT *1 KEY_CLK *1 +5V MS_DAT *1 MS_CLK *1 GND
20 GND +5V RESERVED NC GND NC GND
19 GND -PSTB *2 GND USB_OC6 USB_P5P USB_P5N GND
18 GND -PAFD *2 USB_P6P USB_P6N GND USB_OC5 GND
17 GND PRD2 *2 -PINIT *2 PRD1 *2 -PRERR *2 PRD0 *2 GND
16 GND PRD6 *2 PRD5 *2 PRD4 *2 PRD3 *2 -PSELIN *2 GND
15 GND PSEL *2 PPE *2 PBUSY *2 -PACK *2 PRD7 *2 GND
14 GND SER1_RST *3 SER1_CTS *3 SER1_RI *3 GND SER1_DTR *3 GND
13 GND SER1_DCD *3 +5V SER1_RXD *3 SER1_DSR *3 SER1_TXD *3 GND
12 GND SER2_RTS *3 SER2_CTS *3 SER2_RI *3 +5V SER2_DTR *3 GND
11 GND SER2_DCD *3 GND SER2_RXD *3 SER2_DSR *3 SER2_TXD *3 GND
10 GND FTRK0 -FWPRONT -FRDATA -FHDSEL -FDSKCHG GND
9 GND -FMOTOR1 -FDIRC -PSETP -FWDATA -FWGATE GND
8 GND NC -FINDEX -FMOTOR -FDSEL1 -FDSEL0 GND
7 GND -PIDECS0 -OUDECS1 PIDEA1 -PIDEDASP -FDRVDEN0 GND
6 GND NC GND -PIDEDIAG *4 PIDEA0 *4 PIDEA2 *4 GND
5 GND PIDEDRQ *4
-PIDEIORDY
*4
-SIDEWR *4
-PIDEDACK
*4
- PIDERD *4 GND
4 GND PIDED14 *4 PIDED0 *4 GND PIDED15 *4
PIDEINTRQ
*4
GND
3 GND PIDED3 *4 PIDED12 *4 PIDED2 *4 PIDED13 *4 PIDED1 *4 GND
2 GND PIDED9 *4 PIDED5 *4 PIDED10 *4 PIDED4 *4 PIDED11 *4 GND
1 GND NC -RSTDRV *4 PIDED7 *4 PIDED8 *4 PIDED6 *4 GND
Pin Z A B C D E F
*1 KEYBOARD and MOUSE port signals cannot be used together with the front panel connectors.
*2 PRINTER port signals cannot be used together with the front panel connector.
*3 SERIAL1/2 port signals cannot be used together with the front panel connectors.
*4 Primary IDE port is shared with the IDE port of on board 2.5inch HDD. Therefore, when using the on board 2.5inch
HDD, J5 connector can connect only one drive.