Contec SCP-8550-LLV, Руководство пользователя

Страница: 72 / 78

8. BIOS Setup
SCP-8550-LLV
65
Exit Discarding Changes
If, during a Setup Session, you change your mind about changes you have made and have not yet saved
the values to CMOS, you can restore the values you previously saved to CMOS.
Selecting “Discard Changes” on the Exit menu updates all the selections and displays this message:
CMOS values have been loaded!
Press <space> to continue.
Load Setup Defaults
To display the default values for all the Setup menus, select "Load Setup Defaults" from the Main Menu.
The program displays this message:
ROM Default values have been loaded!
Press <space> to continue
If, during boot up, the BIOS program detects a problem in the integrity of values stored in CMOS, it
displays these messages:
System CMOS checksum bad - run SETUP
Press <F1> to resume, <F2> to Setup
The CMOS values have been corrupted or modified incorrectly, perhaps by an application program that
changes data stored in CMOS.
Press <F1> to resume the boot or <F2> to run Setup with the ROM default values already loaded into the
menus. You can make other changes before saving the values to CMOS.
Save Changes
Selecting “Save Changes” saves all the selections without exiting Setup. You can return to the other
menus if you want to review and change your selections.