8. BIOS Setup
SCP-8550-LLV
47
You can make the following selections on the Main Menu itself. Use the sub menus for other selections.
Feature
Options
Description
System Time
HH:MM:SS
Set the system time.
System Date
MM/DD/YYYY
Set the system date.
Legacy Diskette A
Legacy Diskette B
360 kB, 5 ¼"
1.2 MB, 5 ¼"
720 kB, 3 ½"
1.44/1.25 MB, 3 ½"
2.88 MB, 3 ½"
Disabled
Select the type of floppy-disk drive installed in your
system.
[Disabled] is chosen when not using FDD.
Primary Master
Set to the type of the drive on primary IDE master.
Primary Slave
Set to the type of the drive on primary IDE slave. *2
Secondary Master
Set to the type of the drive on secondary IDE master.
Secondary Slave
This field is set to [AUTO]
by default. You can leave it
intact for normal use.
*1
Set to the type of the drive on secondary IDE slave. *2
System Memory
N/A
Displays amount of conventional memory detected during
boot up.
Extended Memory
N/A
Displays the amount of extended memory detected
during boot up.
*1 Selecting this field changes the screen to the submenu for manually setting drive configuration data such as the
number of cylinders.
*2 This card is supporting two IDE ports that are called primary and secondary. Each port supports two drives of the
master and the slave. Please do not connect it of the slave alone.
You can set the boot sequence of the bootable drives by selecting Boot Sequence on the Main Menu or
opening the Boot Menu.
Primary/Secondary Master,Slave
The Master and Slave sub-menus accessed from the Main Menu control these types of devices:
-
Hard-disk drives
-
Removable-disk drives such as Zip drives
-
CD-ROM drives
This board supports up to two IDE disk adapters, called primary and secondary adapters. Each adapter
supports one master drive and one optional slave drive in these possible combinations:
1 Master
1 Master, 1 Slave
2 Masters
2 Masters, 1 Slave
2 Masters, 2 Slaves
CAUTION
Do not attempt to change these settings unless you have an installed drive that does not autotype
properly (such as an older hard-disk drive that does not support autotyping).
Содержание SCP-8550-LLV
Страница 7: ...vi SCP 8550 LLV...
Страница 37: ...5 Jumper setting 30 SCP 8550 LLV...
Страница 47: ...6 RAS Functions 40 SCP 8550 LLV...
Страница 51: ...7 CPU Board Resources 44 SCP 8550 LLV...
