Contec FX-DS540-AP, Руководство пользователя, Страница: 80 / 99

6 AP Maintenance
FX-DS540-AP, FX-DS540-APP 71
Restoring the Software Settings
Using this function has the following benefits:
- If you have more than one AP and all APs have the same settings, you just need to setup one AP then
use the resulting settings file for the other APs. (However, as this sets the same IP address for all
APs, you need to change the IP address separately.)
- The old settings can be restored easily if a fault causes the settings file to be erased.
Using CF card to Restore the Settings
(1) Turn off the AP power supply, then unplug the CF card.
(2) Load the log file from the unplugged CF card.
(3) Plug the CF card back to the AP.
(4) The AP is started with the restored settings the next time it is turned on.
CAUTION
- Do not plug or unplug the CF card with the AP power supply on.
- The CF card adapter is required for the PC to read from or write to the CF card.
Using FTP to Restore the Settings
(1) Run FTP to log in to the AP.
(2) Transfer the settings file.
When the MAC address filtering and bridge packet control functions are in use, MACFLIST,
LOGFLIST, and BRGFLIST are also transferred.
(3) Issue the reset request command (quote crst).
(4) Quit FTP.
The AP will be restarted.
The following example shows how to restore AP settings using the FTP command coming standard with
Windows.
Invoke the MS-DOS prompt or command prompt and follow the procedure below to restore AP settings.
The example assumes the IP address as 10.168.132.15.
C:\>ftp 10.168.132.15
ftp>put config
ftp>quote crst
ftp>bye
------------ (1)
------------ (2)
------------ (3)
------------ (4)