Automatic programmes
en
49
P
Automatic programmes
Automatic programmes
You can prepare food really easily using the automatic
programmes. You select the programme and enter the
weight of your food. The automatic programme then
applies the most suitable settings. You can select from
15 programmes.
Notes
■
Take the food out of its packaging and weigh it. If it
is not possible to enter the exact weight, you should
round it up or down.
■
Place the food in the cold cooking compartment.
■
For the programmes, always use microwaveable,
heat-resistant cookware, for example made of glass
or ceramic. Observe the accessories tips in the
programme table.
■
For an optimal cooking result, use food that is in
good condition and chilled meat only. For frozen
food, use food straight out of the freezer only.
Setting a programme
Example in the picture: Programme 3 with a weight of 1
kg.
1.
Touch the
=
button.
The first programme number and default weight and
cooking time will be shown on the display.
2.
Select programme number 3 using the settings area.
3.
Touch the °C/
A
button.
The weight setting will be highlighted on the display.
4.
Set the weight to 1 kg using the settings area.
The appliance automatically sets the right cooking
time for that weight.
5.
Touch the
IH
button.
The programme will start. The cooking time will count
down on the display and the temperature bar and
LED
IH
will be lit.
Note:
Once you have started the programme, the
programme number and weight cannot be changed.
The programme has finished
An audible signal sounds. The programme has finished;
the appliance stops heating.
Touch
#
.
Note:
You can use the settings area to extend or set a
new cooking time.
Changing the programme
1.
Touch the
IH
field for approx. four seconds.
The programme is reset.
2.
Select a new programme.
Pausing the operation
1.
Touch the
IH
field or open the appliance door.
The operation is suspended and the
IH
LED flashes.
2.
Close the appliance door.
3.
Touch the
IH
field.
The operation is continued and the
IH
LED lights up.
Cancelling operation
Touch
#
.
The appliance will stop heating and all the settings will
be cleared.
Note:
The fan may continue to run after the appliance
has been paused or stopped.
Содержание CC4W91860
Страница 137: ......
Страница 138: ......
Страница 139: ......
Страница 140: ... RQVWUXFWD 1HII 9HUWULHEV PE DUO HU 6WUD H 0 QFKHQ 50 1 9001277759 9001277759 970510 ...