CONSTRUCTA CC4W91860, Инструкция по эксплуатации

Страница: 45 / 140

Operating the appliance
en
45
Selecting an operating mode
After selecting an operating mode, default values are
shown in the display. You can start this setting
immediately.
The following always applies:
1.
Touch the relevant field for the required operating
mode.
2.
Use the settings area to apply other settings.
3.
Touch
IH
.
The appliance starts the operation.
Setting the heating function and temperature
Example in the picture: Hot air
~
at 200 °C
1.
Touch the
!
button.
The Hot air
~
heating function is set by default. A
default temperature of 160 °C will appear on the
display.
2.
Touch the °C/
A
button.
The temperature is highlighted.
3.
Set the temperature to 200 ºC using the settings
area.
4.
Touch the
IH
button.
The appliance will start heating. The length of the bar
on the temperature indicator gradually increases.
You can change the temperature at any time using the
settings area.
Note:
Once the appliance has heated up, slight
fluctuations in temperature are normal, depending on
the heating function.
Setting the cooking time
1.
Set the type of heating and temperature.
2.
Touch
0
until the
+
symbol is highlighted.
3.
Set the required cooking time using the settings
area.
4.
Touch
IH
.
The appliance begins to heat up. The cooking time
starts counting down.
Pausing the operation
1.
Touch the
IH
field or open the appliance door.
The operation is suspended and the
IH
LED flashes.
2.
Close the appliance door.
3.
Touch the
IH
field.
The operation is continued and the
IH
LED lights up.
Cancelling operation
Touch
#
.
The appliance will stop heating and all the settings will
be cleared.
Note:
The fan may continue to run after the appliance
has been paused or stopped.
Rapid heating
With rapid heating, your appliance reaches the set
temperature particularly quickly.
Only use rapid heating when a temperature of over
100 °C has been selected. Rapid heating is available
for the following types of heating:
■
~
Hot air (Exception: Hot air 40 °C)
■
#
Hot air grill
■
3
Pizza setting
To ensure an even cooking result, do not place your
food in the cooking compartment until rapid heating is
complete.
1.
Set the type of heating and temperature.
2.
Touch
d
.
The
d
symbol lights up on the display.
3.
Touch
IH
.
The appliance begins to heat up. The
IH
LED lights
up.
Rapid heating has finished
An audible signal sounds. The
d
symbol disappears
from the display. Your appliance continues to run with
the set type of heating and temperature. Place your
food in the cooking compartment.
Cancelling rapid heating
Touch
d
. The
d
symbol disappears from the display.
Your appliance continues to run with the set type of
heating and temperature.
Note:
Rapid heating is automatically deactivated within
15 minutes maximum.