R735 • www.consort.be
36 / 36
Perform the following steps:
16.
reset the meter (switch on while holding MODE pressed).
yes?
15.
store all conductivity cells in distilled water with some detergent overnight.
yes?
18.
connect a 1000 ohm resistance to the conductivity input and read display.
µS:
19.
select the °C mode, measure temperature of solutions and read the display.
°C:
20.
rinse the conductivity cell with a 0.01 M KCl calibration solution (1413 µS).
yes?
17.
leave the EC input open, select the conductivity mode and read display.
µS:
21.
connect the conductivity cell, dip in fresh cal. solution (stir!) and read display.
µS:
14.
type of connected electrode:
22.
rinse a new conductivity cell with a 0.01 M KCl calibration solution (1413 µS).
yes?
23.
connect this conductivity cell, dip in fresh cal. solution (stir!) and read display.
µS:
Technical assistance form - Conductivity
If you need assistance with a technical problem, make sure to fill (in CAPITALS !) the
complete
checklist (all
23 points!) and fax a copy to Consort: +32/14/429179.
1.
purchase date:
5.
organisation:
8.
address:
9.
postal code:
10.
city:
11.
telephone:
12.
telefax:
13.
e-mail:
2.
indicate model:
4.
serial no:
R735
2.
purchased from:
"
6.
division:
7.
name:
