DX-1S Digital PABX - Programming Manual
5-21
Default Value
Default = 2000
Related Topic
1.
Programming Item 63 - Trunk Type - Day
2.
Programming Item 66 - Trunk Call Answering - Night
5.4.2
PROGRAMMING ITEM 66 : TRUNK CALL ANSWERING - NIGHT
This item is to assign an extension directory or hunting group directory to answer the incoming call from
a specified trunk line in Night Mode.
The system will transfer the incoming call to the preset Trunk Call Answering Extension Directory or
Hunting Group Directory as the trunk is program as normal trunk line in Programming Item 64.
If the trunk is programmed to answer by DISA with Greeting or DISA with Greeting and Fax Detection,
the system will transfer the incoming call which DISA cannot handle to the preset Trunk Call Answering
Extension Directory or Hunting Group Directory.
Command
3 * 66 * Index1 * Value <Enter> or
3 * 66 * Index1 * Value * Index2 <Enter>
where Index1 = 1 ~ 60 : trunk number
Index2 = 1 ~ 60 : trunk number <Optional>
Value = 10 ~ 59 : 2-digits ext. directory number /ext. hunting group directory number
Value = 100 ~ 599 : 3-digits ext. directory number /ext. hunting group directory number
Value = 1000 ~ 5999 : 4-digits ext. directory number /ext. hunting group directory number
Default Value
Default = 2000
Related Topic
1.
Programming Item 64 - Trunk Type - Night
2.
Programming Item 65 - Trunk Call Answering - Day
5.4.3
PROGRAMMING ITEM 67 : TRUNK DIGIT INSERTION
This item is to assign an insertion number which can be 1 ~ 6 digit numbers for each trunk. When a
number is programmed as the insertion number, the system will automatically insert the programmed
number in the beginning of the user dialed number in outgoing call.
Command
3 * 67 * Index1 * Value <Enter>
where Index1 = 1 ~ 60 : trunk number
Value = 1 ~ 6 digits number : insertion number
To Clear :
3 * 67 * Index1 <Enter>
Default Value
Default = No insertion number
5.4.4
PROGRAMMING ITEM 68 : TRUNK ACCESS CODE INSERTION
This item is to program if the system should automatically insert the Trunk Access Code in the beginning
of the user dialed number in outgoing call. For example, when the extension user dial “9” to access the
trunk and dial “24121386”, the system will dial the digits “924121386” to the trunk if the feature is
enabled.
This feature may be used when the system is connected to other system to form a network.
If Programming Item 67 : Trunk Digit Insertion and Programming Item 68 : Trunk Access Code
Insertion are enabled, the system will insert the digits programmed in Trunk Digit Insertion at first.
Command
3 * 68 * Index1 * Value <Enter> or
3 * 68 * Index1 * Value * Index2 <Enter >
