Connection Electronics DX-1S, Руководство по программированию

Страница: 13 / 157

DX-1S Digital PABX - Programming Manual
4-2
888 Return to BLF mode without saving programming data.
The system will display “System busy…” when enter management mode
again before saving data complete.
99 Save programming data and return to Management mode
999 Save programming data and return to BLF mode
108 Randomize account number password
F4 Exit programming mode and save programming data
Table 4-2 FUNCTION NUMBER IN PROGRAMMING MODE
4.3 DEFINITION
This manual use the following definition to description some terms:
Term Definition
Extension
Number
The port number of the extension which is related to the slot location of
the EXT Card. The number is between 0 ~ 239.
Extension
Directory
Number
The assigned telephone number of the extension and is programmable
in System Programming. The number is between 10 ~ 59 (two digits
directory number), 100 ~ 599 (three digits directory number), 1000 ~
5999 (four digits directory number).
Extension
Hunting
Group
Number
The system include 15 sets of the extension hunting groups with
numbers from 240 to 254. The extension hunting group number is
similar function to extension number although it is not a port number.
Extension
Hunting
Group
Directory
Number
The assigned telephone number of the extension hunting group and is
programmable in System Programming. The number is between 10 ~ 59
(two digits directory number), 100 ~ 599 (three digits directory number),
1000 ~ 5999 (four digits directory number).
Trunk
Number
The trunk number is the port number of the trunk line which is related to
the slot location of TRK/EXT Card. The number is between 1 ~ 60.
Trunk Group
Number
There are up to 16 sets trunk groups which include a number of trunk
lines. The user can access one of trunk line in the trunk group to make
outgoing call by dialing the trunk group number. The number is between
1 ~ 16.
Account
Number Beside using extension dialing class for toll restriction, the system
includes the Account Number Password Control for toll restriction.
There are 2000 account numbers which can be assigned to users. The
account number is between 0000 ~ 1999.
Table 4-3 DEFINITION OF SOME TERMS
4.4 ACCEPT MESSAGE
If the system response the input command with message “OK”, the command is accepted and proceeded.
4.5 ERROR MESSAGE
If the error message is displayed, such as “Invalid command” or “Invalid parameter”, you should check if
the command is in wrong format or no such command. The system may also refuse to accept the
command if there are conflict with other programming data.
4.6 SYSTEM INITIALIZATION
When the system is first installed, it is advised to initiate the programming data to default value before
system programming. System initialization will help to prevent the unreasonable programming data to
affect the system configuration and features.
Programming Command