DX-1S Digital PABX - Programming Manual
5-14
5.1.51 PROGRAMMING ITEM 50 : SPEED DIALING ACCESS FORMAT
This item determine how many digits the Speed Dialing Access Code is.
If there are less than 10 speed dialing memories in use, the Speed Dialing Access Code may be
programmed to two digits.
If there are less than 100 speed dialing memories in use, the Speed Dialing Access Code may be
programmed to three digits.
If there are more than 100 speed dialing memories in use, the Speed Dialing Access Code may be
programmed to four digits.
Command
3 * 50 * Value <Enter>
where Value = 2 ~ 4 (digits)
Example
3 * 50 * 2 - to program the Speed Dialing Access Code to be 2 digits (80 ~ 89)
3 * 50 * 3 - to program the Speed Dialing Access Code to be 3 digits (800 ~ 899)
3 * 50 * 4 - to program the Speed Dialing Access Code to be 4 digits (8000 ~ 8299)
Default Value
Default = 4 (digits)
Related Topic
1.
Programming Item 87 - Directory Number Assignment
5.1.52 PROGRAMMING ITEM 51 : TRUNK TO TRUNK CALL TIMEOUT
This item is to determine the timeout value for the calls which include two trunks, such as Trunk to
Trunk Transfer (a trunk call transfer to outside party or making outgoing call through DISA) and Remote
IDD. These calls will be terminated if the duration are over trunk to trunk call timeout.
The longest duration of calls of Trunk To Trunk Transfer and Remote IDD are limited to 255 minutes
Command
3 * 51 * Value <Enter>
where Value = 1 ~ 255 : 1 ~ 255 minutes
Default Value
Default = 4 (4 minutes)
Example
3 * 51 * 10 <Enter> - to terminate the trunk to trunk call which is over 10 minutes.
Related Topic
1.
Programming Item 69 - Remote Disconnect
1.
5.1.53 PROGRAMMING ITEM 52 : DISA INTERCOM PASSWORD
This item is to program if the caller of an incoming call need to input the password before accessing the
extension user in DISA mode.
Command
3 * 52 * Value <Enter>
where Value = 1 to enable the feature
Value = 0 to disable the feature
Default Value
Default = 0 (disable)
Example
3 * 52 * 1 <Enter> - the caller of an incoming call must input the password before accessing the
extension user in DISA mode.
