DX-1S Digital PABX - Programming Manual
5-22
where Index1 = 1 ~ 60 : trunk number
Index2 = 1 ~ 60 : trunk number <optional>
Value = 1 : enable, 0 : disable
Default Value
Default = 0 (disable)
5.4.5
PROGRAMMING ITEM 69 : REMOTE DISCONNECT
This item is to determine which method is used to terminate the extension outgoing trunk call, trunk to
trunk transfer call (a trunk call transfer to outside party or making outgoing call through DISA) or
Remote IDD Call.
The system will terminate the extension outgoing trunk call in following condition :
•
the originating extension replace the handset.
•
the line reversal signal is detected in outgoing trunk (Programming Item 62 = 1 & Programming
Item 69 = 1 or 2)
The system will terminate the Trunk To Trunk Transfer call in following condition :
•
the call duration reach Trunk to Trunk Call Timeout value (Programming Item 51).
•
the line reversal signal is detected in outgoing trunk (Programming Item 62 = 1 & Programming
Item 69 = 1 or 2).
•
the system receive the DTMF digit “#” from outgoing trunk (Programming Item 69 = 2).
The system will terminate the Remote IDD call in following condition :
•
the call duration reach Trunk to Trunk Call Timeout value (Programming Item 51).
•
the line reversal signal is detected in incoming trunk (Programming Item 62 = 1 & Programming
Item 69 = 1 or 2).
•
the system receive the DTMF digit “*” or “#” in the originating trunk line (no relation with
Programming Item 69).
Command
3 * 69 * Index1 * Value <Enter> or
3 * 69 * Index1 * Value * Index2 <Enter>
where Index1 = 1 ~ 60 : trunk number
Index2 = 1 ~ 60 : trunk number <Optional>
Value = 0 : disable
Value = 1 : polarity restore to idle
Value = 2 : polarity restore to idle or DTMF digit “#”received
Default Value
Default = 0 (disable)
Related Topic
1.
Programming Item 51 - Trunk to Trunk Call Timeout
Example
3 * 69 * 15 * 2 <Enter> - the system will terminate the trunk call in Trunk 15 when the line reversal
signal is detected (apply to extension outgoing trunk call, trunk to trunk transfer call and remote IDD
call), the call duration reach the Trunk to Trunk Call Timeout (apply to trunk to trunk transfer call and
remote IDD), and the DTMF digit “#” is received (apply to trunk to trunk transfer call).