DX-1S Digital PABX - Programming Manual
5-11
5.1.42 PROGRAMMING ITEM 41 : OPERATOR ANSWERING
This item determine which extension directory number or extension hunting group directory number is
the attendant operator.
Command
3 * 41 * Value <Enter>
where Value = 10 ~ 59: 2-digits ext. directory number /ext. hunting group directory number
Value = 100 ~ 599: 3-digits ext. directory number /ext. hunting group directory number
Value = 1000 ~ 5999: 4-digits ext. directory number /ext. hunting group directory number
Default Value
Default = 2000
5.1.43 PROGRAMMING ITEM 42 : FAX ANSWERING
This item determine which extension directory number or extension hunting group directory number is
installed with fax machine. The system will transfer the call to the extension if the call is confirmed to be
sent by a fax machine in Fax Detection.
Command
3 * 42 * Value <Enter>
where Value = 10 ~ 59: 2-digits ext. directory number /ext. hunting group directory number
Value = 100 ~ 599: 3-digits ext. directory number /ext. hunting group directory number
Value = 1000 ~ 5999: 4-digits ext. directory number /ext. hunting group directory number
Default Value
Default = 2000
Related Topic
1.
Programming Item 63 - Trunk Type (Day)
2.
Programming Item 64 - Trunk Type (Night)
5.1.44 PROGRAMMING ITEM 43 : DTMF RECEIVER SERVICE STATUS
The item is to enable or disable the DTMF Receivers in Module Control Card if one or some receivers are
in failure.
Command
3 * 43 * Index1 * Value <Enter> or
3 * 43 * Index1 * Value * Index2 <Enter>
where Index1 = 0 ~ 15 : DTMF Receiver No.
Index2 = 0 ~ 15 : DTMF Receiver No. <Optional>
Value = 1 to enable, 0 disable
Default Value
Default = 1 for all DTMF Receivers
5.1.45 PROGRAMMING ITEM 44 : CALIBRATED FLASH STATUS
The system can detect the flash in DTMF extension telephone which is shorter than 0.2 seconds if this
item is enable.
Command
3 * 44 * Value <Enter>
where Value = 1 to enable the feature ; 0 to disable the feature
Condition
1.
If Calibrated Flash is enabled, the Automatic Tone/Pulse Detection will be disabled.
2.
When Calibrated Flash is enabled, the extension which is programmed to be DTMF dialing will not
able to receive pulse digits and must not connect to a pulse telephone.
Default Value
Default = 1 (enable)
