DX-1S Digital PABX - Programming Manual
5-54
Example
3 * 140 * 3 <Enter> - to set PCM digit deletion to 3. If there is a PCM incoming call with called party
number ‘2271267’, the system will delete the first 3 digits and then the called party will become 1267.
The system will ring EXT 1267 to receive the call.
Default Value
Default = 0
Related Topic
1.
Programming Item 132: PCM Trunk Service Status
5.7.42 PROGRAMMING ITEM 141 : BLF MODE
This item is to program the display style in BLF Mode which defines the meaning of blinking extension
in MFC-1S console.
BLF MODE
Meaning of Blinking Extension
0
Incoming extension to console or ringing extension
1
Incoming extension to console only
2
Ringing extension only
Command
3 * 141 * Value <Enter>
where Value = 0 : Incoming extension to console or ringing extension
Value = 1 : Incoming extension to console only
Value = 2 : Ringing extension only
Default Value
Default = 0
5.7.43 PROGRAMMING ITEM 142 : DISA NO ANSWER DISCONNECT
This item defines the system action during DISA no answer.
System will prompt caller to retry other extension and monitor busy tone until call is answered.
System will disconnect the call and release the DVC.
Command
3 * 142 * Value <Enter>
where Value = 0 : Prompt caller to retry other extension
Value = 1 : Disconnect the call
Condition
No answer transfer is disabled in DISA.
Default Value
Default = 0
Related Topic
1.
Programming item 63: Trunk Type - Day
2.
Programming item 64: Trunk Type - Night
5.7.44 PROGRAMMING ITEM 143 : TRANSFER NO ANSWER DISCONNECT
This item defines the system action during there is no answer to a transferred call.
•
System will call back original party.
•
System will disconnect the call.
Command
3 * 143 * Value <Enter>
where Value = 0 : call back original party
Value = 1 : disconnect the call
Default Value
Default = 0
