Condair Dual 2, Инструкция по установке и эксплуатации

Страница: 28 / 80

28
Install the tub seal:
15. Cut the whole length of the tub sealing to the appropriate width (width =
distance between upper edge of lower cross arm and bottom of duct
plus 30 mm).
Then, starting on one side of the duct fix the tub seal to the lower cross
arm using the supplied fastening sheets, M6x12 hexagon socket screws
and washers.
Important! The tub seal must be installed in one piece (do not cut).
Important! Make sure the tub seal tightly joins to the duct floor (adjust
with knife if necessary) and verify appropriate tightness on both sides
of the duct wall.
15