Danger that may arise from the unit
–
The Condair CP3 D is mains powered.
WARNING!
One may get in touch with live parts when the unit is open. Touching live
parts may cause severe injury or danger to life.
Prevention: Before carrying out any work set the Condair CP3 D out of operation as de-
scribed in chapter 6.3 (switch off the unit, disconnect it from the mains and
stop the water supply) and secure the unit against inadvertent power-up.
– The Condair CP3 D produces steam. When producing steam, the steam cylinder inside the
steam generator gets very hot (up to 100 °C).
WARNING!
If the unit is opened immediately after having produced steam there is danger
of burning when touching the steam cylinder.
Prevention: Before carrying out any work set the Condair CP3 D out of operation as de-
scribed in chapter 6.3, then wait until the evaporation unit has cooled down
sufficiently thus preventing danger of burning.
Behaviour in case of danger
If it is suspected that
safe operation is no longer possible
, then the Condair CP3 D should imme-
diately
be shut down and secured against accidental power-up according to chapter 6.3
. This
can be the case under the following circumstances:
– if the Condair CP3 D or its mains cable is damaged
– if the Condair CP3 D is no longer operating correctly
– if connections and/or piping are not sealed
All persons working with the Condair CP3 D must report any alterations to the unit that may affect
safety to the owner without delay.
Prohibited modifications to the unit
No modifications must be undertaken
on the Condair CP3 D without the express written consent
of the manufacturer.
For the replacement of defective components use exclusively
original accessories and spare parts
available from your Condair supplier.
