2
8.2
Notes on fault elimination
WARNING!
For the elimination of faults
set the steam generator out of operation
as described
in chapter .3,
separate the unit from the mains
and
secure it against inadvert-
ent power-up
.
The elimination of faults must be carried out by qualified and well trained professionals only.
Malfunctions relating to the electrical installation (e.g. replacement of fuses) must be repaired by
authorized personnel or by your Condair representative’s service technician only.
Repair work and the replacement of faulty components must be carried out by your Condair repre-
sentative’s service technician only!
8.3
Resetting the error indication (red LED lights)
To reset the error indication:
Disconnect the steam generator from the mains. Wait approx. 5 seconds, then reconnect the
unit to the mains.
Note: If the fault has not been eliminated, the error indication reappears after a short while.
