Concept2 SVK6550ss, Руководство пользователя

Страница: 97 / 108

97
EN
SVK6550ss / SVK6550wh
REMOVING THE OVEN DOOR
To achieve better access to the oven chamber and for
better cleaning, it is possible to pull out the oven door. For
this purpose, it is necessary to open the door, tilt upwards
the securing element located in the hinge (Fig. 4). Slightly
close the door, lift it and pull it forward. To place the door
back, proceed in the opposite way. When placing back,
make sure that the notch on the hinge is correctly fitted on
the protrusion of the hinge holder. After attaching the door
to the oven, the securing element must be lowered and
pressed carefully.
Improper adjustment of the securing element can cause
damage to the hinge when trying to close the door.
Removing the inner glass pane
1. Use a Phillips screwdriver to remove the screws on the
side clamps (Fig. 5).
2. Remove the clamps with a flat screwdriver and remove
the upper door bar (Fig. 5, 6).
3. Remove the inner glass from the clips at the bottom of
the oven door (Fig. 6 and 7).
4. Clean the glass with warm water and a small amount of
detergent.
Fig. 3
Fig.4
Fig. 5