Concept2 SVK6550ss, Руководство пользователя

Страница: 91 / 108

91
EN
SVK6550ss / SVK6550wh
Timer
The timer can be activated at any time, regardless of the activity status of other programmer functions. The measured
time range is from 1 minute to 23 hours and 59 minutes.
To set the timer it’s necessary to:
• press the MENU sensor, the following symbol (5) will start flashing on the display:
• set the timer time using the sensors </>, the display will show the set timer time and active functions. After the set
time has elapsed, an acoustic signal sounds and the following symbol (5) starts flashing,
• press and hold </> or the menu to turn off the acoustic signal, the symbol (5) will go out and the current time will
appear on the display after about 7 seconds.
Caution!
If the acoustic signal is not switched off manually, it switches off automatically after approx. 7 minutes
Semi-automatic mode
If the oven is to be switched off at a certain time, it is necessary to:
• set the oven control knob and the temperature control knob to the position in which the oven is to operate,
• press and hold the
MENU
sensor until the moment dur appears on the display and the symbol (6) flashes,
• set the required operating time using the sensors </> in the range from 1 minute to 10 hours.
The set time will be saved in the memory after approx. 7 seconds, the display will show the current time again while
the symbol (6) is on.
When the set time has elapsed, the oven switches off automatically, an acoustic signal sounds and the symbols (6) and
(7) flash.
• set the oven control knobs and temperature control knob to the off position,
• press and hold the sensor </> or
MENU
to turn off the acoustic signal, the symbol will go out and the current time
will appear on the display after about 7 seconds.
Automatic mode
If the oven is to be switched on at the specified time and switched off at the specified time, the work duration time and
the work termination time must be set.
• press and hold the
MENU
sensor until the moment dur appears on the display and the symbol (6) flashes,
• set the required time from 1 minute to 10 hours using the </> buttons, as for semi-automatic work,
• press and hold the
MENU sensor until the moment End appears on the display and the symbol (7) flashes,
• set the switch-off time (termination of work) using sensors </>, which is limited to the time up to 23 hours and 59
minutes,
• set the oven control knob and the temperature control knob to the position in which the oven is to operate,
Symbols (6) and (7) are active, oven operation starts at the moment which is the difference between the set
termination time and the set working time (for example the set working time is 1 hour, the set termination time is
14:00, the oven switches on automatically at 13:00).