49
PC5050
EN
CLEANING AND MAINTENANCE
Turn the unit off, unplug the power cord from the wall outlet, and let the unit cool before cleaning and after use.
The unit and its accessories can be cleaned with a wet cloth.
Wash the replaceable parts in tepid water with detergent and rinse in clean water.
Do not immerse the baking pan in liquids. Just wash the inside with warm water with detergent and then rinse with
clean water. Clean the outer surfaces with a wet cloth.
Do not use steel wool, abrasive agents or solvents to clean the unit.
Problem
Cause
Bread has risen too much.
Use a lower volume of ingredients and keep the dosage ratio.
Bread has risen too much, then
collapsed.
Too little flour, too much yeast, too much water, or water is too hot.
Bread has not risen enough.
Too much flour, too little yeast, too much water, not enough sugar, poor
quality of flour, water is too cold, unsuitable program. Keep the dosage ratio.
Crust is not well done.
Program has been suspended for too long, frequent opening of the lid, too
much yeast, poor quality of flour, unsuitable program.
Crust is brown on the sides, but
the crumb is not well done.
Too much water.
Sides and top of the loaf are
dusted with flour.
Too much flour, not enough water.
TROUBLESHOOTING
POSSIBLE PROBLEMS DURING BAKING
Problem
Cause
Solution
Cause
Solution
Check the plug connection.
The mains outlet is not live.
Check for voltage, e.g. by connecting
another appliance.
The unit starts pre-heating
when program is launched.
This is a normal function. This is not
a defect.
The ventilation grille emits
smoke during baking.
Some ingredients or impurities
are in the heater.
Disconnect the cable from the socket.
Let the unit cool. Clean the heater.
Bread can hardly be removed.
Dirty kneading blade can't be
taken from the spindle.
After you remove the loaf, pour water in
the baking pan, let the kneading blade
soak, then clean it. Before mounting,
lubricate the spindle with edible oil or fat.
After pressing START/STOP
button "H:HH" is displayed.
Temperature in the baking area
is too high, e .g. after previous
baking.
Disconnect the cable from the socket.
Open the lid, remove the baking pan, and
let the unit cool.
