Comtrol DeviceMaster Up, Руководство пользователя

Страница: 31 / 48

Chapter 4. Commissioning the DeviceMaster UP DeviceMaster UP PROFINET CbA User Guide : 2000409 Rev. D - 31
Chapter 4. Commissioning the DeviceMaster UP
4.1. Overview
This section describes how to commission a DeviceMaster UP and covers the following topics:
• 4.2. Importing the PROFINET CbA Component into a SIMATIC iMap Library on Page 32
• 4.3. Inserting the PROFINET CbA Component into a SIMATIC iMap Project on Page 33
• 4.4. Enabling the Serial Port in SIMATIC iMap on Page 35
• 4.5. Interconnecting Technological Functions on Page 35
• 4.6. Setting a Project’s Transfer Properties on Page 37
• 4.7. Assigning Addresses on Page 39
• 4.8. Using PortVision Plus to Change the PROFINET CbA Number on Page 40
• 4.9. Downloading Interconnections from SIMATIC iMap on Page 41
• 4.10. Documenting and Printing a Project on Page 41
• 4.11. Changing the IP Address on Page 42
You may want to read Chapter 2. Programming Interface on Page 11 before performing any of the procedures
in this section.
You must meet the following requirements:
• SIMATIC iMap must be installed on your computer.
Note: If your computer is running Windows 2000 Professional or Windows XP Professional, go to the
Siemens web site and review the notes on the operation of SIMATIC iMap under Windows 2000 and
Windows XP. If you have Microsoft Security Update 828741 installed on Windows 2000
Professional or Service Pack 2 installed on Windows XP Professional, you will need to make
additional changes to your operating system to download the PROFINET CbA component on the
DeviceMaster UP through SIMATIC iMap.
• The DeviceMaster UP must be connected to the same network segment as the PLC.
• A PROFINET CbA component (
.xml
) file and the icon ( .ico ) file provided in the self-installing (
.MSI
) file.
These files are copied to the
Comtrol/PROFINET_CbA
folder on your computer when you open the
.MSI
file and follow the prompts.