Chapter 4. Commissioning the DeviceMaster UP
DeviceMaster UP PROFINET CbA User Guide
: 2000409 Rev. D
- 33
Inserting the PROFINET CbA Component into a SIMATIC iMap Project
4.3. Inserting the PROFINET CbA Component into a SIMATIC iMap
Project
This procedure describes how to insert a PROFINET CbA component into a project. SIMATIC iMap may
provide alternate ways to perform the task described here, see the on-line help system in the SIMATIC iMap
for additional information.
The PROFINET CbA components that you want to insert into your project must be contained in a library in
SIMATIC iMap. See
4.2. Importing the PROFINET CbA Component into a SIMATIC iMap Library
, earlier in
this chapter, for complete instructions.
The following subsections provide this information:
•
4.3.1. What is a Technological Function?
•
4.3.2. What is a PROFINET CbA Number?
•
4.3.1.
What is a Technological Function?
In Component based Automation, the technological function of a PROFINET CbA component comprises the
application-specific functionality of a programmable controller or field device and the component interface for
communication with other PROFINET CbA components.
SIMATIC iMap displays the technological function as a
block with inputs and outputs in the SIMATIC iMap
plant view. The following example shows the
technological function for a DeviceMaster UP 1-port.
4.3.2.
What is a PROFINET CbA
Number?
SIMATIC iMap assigns a PROFINET CbA number
(
PROFINET No
) technological function when you insert
a PROFINET CbA component into a project. The
technological function in the example above has a
PROFINET No
of 0 because it was the first PROFINET
CbA component for a DeviceMaster UP inserted into
the project. When you insert additional instances of a
PROFINET CbA component for DeviceMaster UP into
a project, the name of the technological function is
increment by one. (For example, SIMATIC iMap
assigns the DeviceMaster to PROFINET CbA number 0, DeviceMaster_1 to PROFINET CbA number 1, etc.)
The DeviceMaster in the following example is assigned to PROFINET CbA number 2.
Record the PROFINET CbA number, its associated IP address and subnet mask for each PROFINET CbA
component you insert into a project. You will need the PROFINET CbA number when you change the network
settings through the web page for each DeviceMaster UP. For more information, see
Plus to Change the PROFINET CbA Number
PROFINET CbA Number
Содержание DeviceMaster Up
Страница 1: ...PROFINET CbA User Guide ...
