26 -
DeviceMaster UP PROFINET CbA User Guide
: 2000409 Rev. D
Chapter 3. Configuring the DeviceMaster UP
Edit Network Configuration Page
3.3. Edit Network Configuration Page
You can use the
Edit Network Configuration
page to change the DeviceMaster UP network configuration after
using PortVision Plus for initial network configuration.
Use the following procedure to change the network configuration.
1.
Select the IP configuration type (
DHCP
or
Static
).
2.
If you select
Static
, enter a valid IP address, subnet mask, and IP gateway for your network. The network
information is programmed into the DeviceMaster after applying the changes and rebooting the device. If
necessary, see your network administrator for a valid IP address.
Note:
The DeviceMaster family default IP address is 192.168.250.250, default subnet mask is
255.255.0.0, and the default IP gateway is 192.168.250.1.
3.
Enter the PROFINET CbA number for the device in the provided box. For more information, see
What is a PROFINET CbA Number?
4.
Select
Save
or
Undo Changes
to close the page.
5.
If you selected
Save
, select
Reboot
to program the network
information into the DeviceMaster UP or
Continue
if you
want to reboot later.
Note:
Changed network settings will not take affect until the
DeviceMaster UP is rebooted.
Содержание DeviceMaster Up
Страница 1: ...PROFINET CbA User Guide ...
