Comtech EF Data LPOD, Инструкция по установке и эксплуатации

Страница: 155 / 250

LPOD C-, X-, or Ku-Band Outdoor Amplifier / Block Up Converter (BUC) MN-LPOD
Serial Interface Operation Revision 14
5–25
Parameter Type
(* indicates
End-of-Life)
Controller-to-Target
Instruction Code and
Qualifier
Arguments for
Command or
Query
Description of Arguments
(Note that all arguments are ASCII numeric codes from 48 to 57)
Target-to-Controller
(see Description of Arguments)
Command Query
Response to
Command
Response to
Query
RF Power FET
current Status
N/A RFS? Length varies
depending on
the number of
installed FETs
Query only.
Returns currents, in amps, for all installed FETs.
EXAMPLE: <0001/RFS? {CR}
>0001/RFS={CR}
Q01=.xxx{CR}
Q02=.xxx{CR}
Q03=xx.x{CR}
Q04=xx.x{CR}
Q05=xx.x{CR}
Q06=xx.x{CR}
Q07=xx.x{CR}
Q08=xx.x{CR}
Q09=xx.x{CR}
Q10=xx.x{CR}
Q11=xx.x{CR}
Q12=xx.x{CR}
Q13=xx.x{CR}
Q14=xx.x{CR}
Q15=xx.x{CR}
Q16=xx.x{CR}{LF}
NOTE: If the reported value is ≥1A , the format is xx.x; if the value is <1A, the format is .xxx
RFS= RFS=x….x