Comtech EF Data LPOD, Инструкция по установке и эксплуатации

Страница: 145 / 250

LPOD C-, X-, or Ku-Band Outdoor Amplifier / Block Up Converter (BUC) MN-LPOD
Serial Interface Operation Revision 14
5–15
Parameter Type
(* indicates
End-of-Life)
Controller-to-Target
Instruction Code and
Qualifier
Arguments for
Command or
Query
Description of Arguments
(Note that all arguments are ASCII numeric codes from 48 to 57)
Target-to-Controller
(see Description of Arguments)
Command Query
Response to
Command
Response to
Query
Concise
Maintenance
Status (continued)
nnn.n=FANR2 (SEE NOTE 2)
ooo.o=BUCVT (SEE NOTE 2)
ppp.p=FWPWR
qqq.q=REFVT (SEE NOTE 2)
rrr.r=LNBCS
(SEE NOTE 2)
sss.s=ATEMP
ttt.t=OTEMP (SEE NOTE 2)
NOTES:
1) This is the concise version of the RMS command.
2) ccc.c, ggg.g, mmm.m, nnn.n, ooo.o, qqq.q, rrr.r, and ttt.t will appear if the appropriate model/options have been
selected/installed. Otherwise, the unused fields will display XXXXX.
EXAMPLE: <1/CMS?{CR}
>0001/CMS=aaa.a;bbb.b;ccc.c;ddd.d;eee.e;fff.f;ggg.g;hhh.h;iii.i;jjj.j;kkk.k;lll.l;mmm.m;nnn.n;ooo.o;ppp.p;
qqq.q; rrr.r;sss.s;ttt.t{CR}{LF}
Clear Statistics Log CSL= N/A 1 byte Command only.
Clears the statistics log entries in the form x, where x=1.
EXAMPLE: <0001/CSL=1{CR}
CSL=
CSL?
CSL*
CSL=
Clear Trending
Data
CTD= N/A
1 byte
Command only.
Clears the trending data in the form x, where:
x=1
EXAMPLE: <0001/CTD=1{cr}
CTD=
CTD?
CTD*
CTD=
Concise Utility
Status*
N/A CUS? 15 bytes Query only.
Returns the Maintenance status of the unit, in the form aaaa;bbbbb;ccc, response is semicolon-delimited, where:
aaaa=Remote Unit Address
bbbbb=Remote Baud Rate
ccc=Reference oscillator tuning voltage DAC value (present only if a reference oscillator is installed)
EXAMPLE: <0001/CUS?{CR}
>0001/CUS=aaaa;bbbbb;ccc{CR}{LF}
CUS= CUS=x….x
LNB Current
Window Enable
CWE= CWE? 1 bytes Command or Query.
Sets or returns the LNB current window alarm in the form x, where:
0=Disabled (DEFAULT)
1=Enabled (SEE NOTE)
NOTE: If disabled, the LCW value will be retained, but unused.
COMMAND EXAMPLE: <0001/CWE=0{CR}
CWE =
CWE?
CWE *
CWE =x
Set RTC Date (by
Month)*
DAT= DAT? 6 bytes Command or Query.
Sets or returns the Real-Time-Clock date in the form mmddyy, where:
mm=month of the year (01 to 12)
dd=day of the month (01 to 31)
yy=year (00 to 96) (2000 to 2096)
COMMAND EXAMPLE (date=April 25, 2016): <0001/DAT=042516{CR}
DAT=
DAT?
DAT*
DAT=mmddyy