Comtech EF Data LPOD, Инструкция по установке и эксплуатации

Страница: 109 / 250

LPOD C-, X-, or Ku-Band Outdoor Amplifier / Block Up Converter (BUC) MN-LPOD
Ethernet Interface Operation Revision 14
4–17
Click [Change IP Address] to save any changes.
System Account Access Information
Name fields can be any alphanumeric combination with a maximum length of 10
characters.
Password fields can be any alphanumeric combination with a maximum length
of 10 characters.
•
Admin , Read/Write , and Read Only Names and Passwords – The factory
defaults for these names/passwords are:
o
Admin comtech/comtech
o
Read/Write opcenter/1234
o
Read Only monitor/1234
•
SMTP Server: Enter the mail server IP address from where you want to
send the e-mail.
•
SMTP Domain Name / Destination: The Administrator can assign the
SMTP Domain Name and Destination. This is required if you wish to use
the e-mail feature of the ‘Home | Support’ Page (Sect. 4.5.1.3).
o
For SMTP Domain Name , enter the domain of the e-mail server
(usually found to the right of the @ symbol in an e-mail address).
o
For SMTP Domain Destination , enter the e-mail recipient name
(usually found to the left of the @ symbol in an e-mail address).
Click Submit Access to save any changes.
Webpage Timeout
The Webpage Timeout sets the time period that can pass before the HTTP
Interface pages time out.
• Use the drop-down list to select 5 minutes (default) or 8 hours .
•
Click Submit .
The Status | Status page automatically refreshes once every ten
seconds, and resets the timeout counter.