Comtech EF Data LPOD, Инструкция по установке и эксплуатации

Страница: 126 / 250

LPOD C-, X-, or Ku-Band Outdoor Amplifier / Block Up Converter (BUC) MN-LPOD
Ethernet Interface Operation Revision 14
4–34
This scrolling page provides graphs that show trends over time for the following
operating parameters:
•
Amplifier Temperature
•
Amplifier Output Power
• LNB Current
• Operating Status
• Rx Mute Status
•
Online Status
•
Minimum Fan Speed
Trending Graph Time Settings
Choose the time, date, and duration of the trending information displayed on the
graphs.
•
Start Date (mm/dd/yy): Once a unit has been in operation for 24 hours
or more, use the drop-down list to select a date – up to a maximum of 28
days, including the present date – from which to compile data. If a unit
has
not
been in operation for 24 hours, only present will be available.
•
Time: Once a unit has been in
operation for 24 hours or more,
use this drop-down list to select the time on the hour – 24 hours, from 12
am to 11 pm , are available. Note that, for the first 24 hours of operation
(or beyond if the time has accrued), if you select
present
as the
Start
Date
, then the
Time
drop-down list becomes unavailable for selection
and dims as shown here.
• Duration:
Use the drop-down list to select the block of time in which data
is compiled for the graphs. Select
30 minutes
,
1 hour
,
2 hours
,
4 hours
,
6
hours , 8 hours , 12 hours , 24 hours , or 48 hours .
The LPOD stores the trending data to flash memory once per hour. If
you power down the unit before the data can be written to memory ,
the last 60 minutes of data will be lost.
Click [Submit] to execute your settings choices.