Comtech EF Data LPOD, Инструкция по установке и эксплуатации

Страница: 143 / 250

LPOD C-, X-, or Ku-Band Outdoor Amplifier / Block Up Converter (BUC) MN-LPOD
Serial Interface Operation Revision 14
5–13
Parameter Type
(* indicates
End-of-Life)
Controller-to-Target
Instruction Code and
Qualifier
Arguments for
Command or
Query
Description of Arguments
(Note that all arguments are ASCII numeric codes from 48 to 57)
Target-to-Controller
(see Description of Arguments)
Command Query
Response to
Command
Response to
Query
Concise Alarm
Status (continued)
r=Forward Power Alarm
s=Flash Checksum
t=FPGA Done
u=BUC Lock Detect (SEE NOTE 4)
v=External Ref Lock Detect
(SEE NOTE 4)
w=LNB Current (SEE NOTE 4)
x=Redundancy Switch Condition (SEE NOTE 4)
y=Redundancy Link Status (SEE NOTE 4)
z=Terminal Status Change
NOTES:
1) This is the condensed version of the RAS query.
2) ?? is an invalid fault condition because hardware failed to respond to query (this value is accompanied by an I2C
fault).
3) NA=not applicable. The unit does not include hardware support for this parameter.
4) c, g, n, u, v, w, x, and y appear if the appropriate model/options have been selected/installed.
Concise
Configuration
Status
N/A CCS? 26 bytes Query only.
Returns the configuration status of the unit, in the form aa.aa;b;c;d;e;ff.ff;g;hhh, where:
aa.aa=attenuation in dB (ATT)
b=RF power amplifier state where 0=Off, 1=On (AMP)
c=mute state where 0=unmuted, 1=muted (MUT)
d=online status (ONL)
e=redundancy state and mode (ESW)
ff.ff=Attenuator offset in dB (AOF)
g=auto fault recovery mode (AFR)
hhh=External reference status where N/A=no external reference, 05M=5 MHz, 10M=10 MHz
(SEE NOTE 2)
NOTES:
1) This is the condensed version of the RCS query.
2) hhh will always be N/A (not applicable) if the internal reference oscillator option is not installed.
EXAMPLE: <1/CCS?{CR}
>0001/CCS=aa.aa;b;c;d;e;ff.ff;g;hhh; {CR}{LF}
CCS= CCS=aa.aa;...hh
h
Concise RF Power
FET Current Status
N/A CFS? Length varies
depending on
the number of
installed FETs
Query only.
Returns the power values of installed FETs, comma-delimited, in concise format.
NOTE: This is the condensed version of the RFS query.
EXAMPLE: <0001/CFS?{CR}
>0001/CFS=xxx,xxx,x.x,x.x,……….,x.x,{CR}{LF}
CFS= CFS=x;…..x