Comtech EF Data HPOD, Инструкция по установке и эксплуатации

Страница: 96 / 161

HPOD C-, X-, Ku-Band High-Power Outdoor Amplifier
Revision 9
Serial-Based Remote Product Management 5–23 MN/HPOD.IOM
Parameter
Type
Command
(Instruction
& Qualifier)
Number of
Arguments
Description of Arguments
Response to
Command
Query
(Instruction &
Qualifier)
Response to
Query
Retrieve
Number of
unread
Stored
Alarms N/A 2 bytes,
numeric,
00 to 99 Query only.
Returns the number of stored events that remain unread in the
alarm log, in the form xx, where:
Xx = A maximum of 99 events may be stored in the alarm log.
Example:
<1/TNA? ’cr’
>0001/TNA=14’cr’’lf’ N/A TNA? TNA=xx
(See
Description of
Arguments)
Terminal
Status
change N/A 1 byte,
value of 0,1 Query only.
Indicates if there has been a change in the terminal status since
the last time the command was given. A value of 0 indicates no
status change, and a value of 1 indicates there has been a
terminal status change.
Example:
<1/TSC?’cr’
>0001/TSC=0’cr’’lf’ N/A TSC? TSC=x
(See
Description of
Arguments)
Software
Image IMG= 1 byte Command or Query.
Current Active software image, in the form x, where:
1=Bulk Image # 1 currently active
2=Bulk Image # 2 currently active
Example: IMG=1 (which is Image #1 active)
IMG=
IMG?
IMG*
IMG# IMG? IMG=x
(See
Description of
Arguments)
IP Address IPA= 18 bytes Command or Query.
Set the IP address and network prefix for the 10/100 BaseT
Ethernet management port, in the form aaa.bbb.ccc.ddd.yy
where:
aaa = 0-223
bbb = 0-255
ccc = 0-255
ddd = 001-255
yy = 08-30
Default Value: 192.168.001.004.24
Example: 192.168.001.004.24
IPA=
IPA?
IPA*
IPA# IPA? IPA=
aaa.bbb.ccc.d
dd.yy (see
Description of
Arguments)