Comtech EF Data HPOD, Инструкция по установке и эксплуатации

Страница: 65 / 161

HPOD C-, X-, Ku-Band High-Power Outdoor Amplifier
Revision 9
Ethernet-Based Remote Product Management 4–14 MN/HPOD.IOM
4.5.5.2.2 Admin | SNMP Page
Sect. 4.3 SNMP INTERFACE
The Administrator must use this page to manage the HPOD SNMP (Simple Network
Management Protocol) settings.
Figure 4-3. Admin | SNMP page
At any time, click [Refresh] to update this page and see the most recent data.
SNMP

Simple Network Management – Use the drop-down list to set SNMP as Enabled or
Disabled .

Read / Write / Trap Community Strings – These defaults, set at the factory, may be
changed as needed:
Field Factory Default Name
Number of
Characters
Format
Read Community String public 0 to 20 alphanumeric
Write Community String private 0 to 20 alphanumeric
Trap Community String comtech 0 to 20 alphabetic

SNMP Contact / Name / Location – Enter this contact information as needed, in
alphanumeric format, up to a maximum of 20 characters.

Enabled Authentication Trap – Use the drop-down list to set the Authentication Trap as
Enabled or Disabled .

Trap IP 1 / Trap IP 2 – The Administrator can assign up to two SNMP Trap IP addresses in
the form 000.000.000.000 .

Trap Version – Use the drop-down list to select the SNMP Trap as version SNMPv1 or
SNMPv2c .
Click [ Submit SNMP] to save these changes or click [Reset] to revert to the previously assigned
SNMP settings.