Comtech EF Data HPOD, Инструкция по установке и эксплуатации

Страница: 92 / 161

HPOD C-, X-, Ku-Band High-Power Outdoor Amplifier
Revision 9
Serial-Based Remote Product Management 5–19 MN/HPOD.IOM
Parameter
Type
Command
(Instruction
& Qualifier)
Number of
Arguments
Description of Arguments
Response to
Command
Query
(Instruction &
Qualifier)
Response to
Query
Redundancy
State RED= 1 byte,
value of 0,
1, 2 Command or Query.
Set or report as ON or OFF the redundancy state, in the form x,
where:
0 = Off
1 = 1:1 Redundancy
2 = 1:2 Redundancy
Example:
<1/RED=1’cr’
>0001/RED=’cr’’lf’
RED=
RED?
RED* RED? RED =x
Reference
Oscillator
Tuning REF= 3 bytes,
numeric Command or Query.
Adjusts the reference oscillator tuning voltage by sending a DAC
value in the form xxx, where:
xxx = numeric value from 0 to 255, and the default value is set to
87.
Example:
<1/REF=87’cr’
>0001/REF=
Note: This command sets the DAC value, but the actual
Reference Oscillator tuning voltage can be monitored using the
RMS command.
REF=
REF?
REF* REF? REF=xxx
(See
Description of
Arguments)
Retrieve
Equipment
Type N/A 22 bytes,
alphanumeri
c Query only.
Returns the Model Number and the version of the MnC firmware
installed in the unit.
Example:
<1/RET?’cr’
>0001/RET=CPA-300 VER: 1.0.3’cr’’lf’
N/A RET? RET=x….x
(See
Description of
Arguments)