Comtech EF Data CDD-880, Инструкция по установке и эксплуатации

Страница: 64 / 234

CDD-880 Multi Receiver Router MN-CDD880
Updating Firmware Revision 2
4–8
4.4 Perform the Ethernet FTP Upload Procedure
YOU MAY PROCEED WITH THE FIRMWARE UPDATE PROCEDURE, ASSUMING THAT:
• YOUR CDD-880 IS CONNECTED TO A USER-SUPPLIED, WINDOWS-BASED PC,
AS FOLLOWS:
O
THE PC SERIAL PORT IS CONNECTED TO THE CDD-880 ‘CONSOLE’ PORT.
O
THE PC ETHERNET PORT IS CONNECTED TO THE CDD-880 ‘ETHERNET |
TRAFFIC / MANAGEMENT | GE’ 10/100/1000 BASET GIGABIT ETHERNET
PORT WITH A USER-SUPPLIED HUB, SWITCH, OR DIRECT ETHERNET CABLE
CONNECTION.
O
THE PC IS RUNNING A TERMINAL EMULATION PROGRAM (FOR
OPERATION OF THE CDD-880 SERIAL INTERFACE) AND A COMPATIBLE
WEB BROWSER (FOR OPERATION OF THE CDD-880 HTTP INTERFACE).
•
THE CDD-880 MANAGEMENT IP ADDRESS HAS BEEN NOTED USING THE CDD-
880 SERIAL INTERFACE, AND THE FIRMWARE HAS BEEN IDENTIFIED USING
EITHER THE CDD-880 SERIAL INTERFACE OR THE CDD-880 HTTP INTERFACE
‘ADMIN | FIRMWARE’ PAGE.
• YOU HAVE DOWNLOADED, OR OTHERWISE RECEIVED FROM COMTECH EF
DATA, THE LATEST FIRMWARE UPDATE AND THE EXTRACTED FILES ARE
AVAILABLE ON THE USER PC IN AN ACCESSIBLE TEMPORARY FOLDER.
Do these steps:
1. Use Command-Line to send a ‘PING’ command to confirm proper connection and
communication between the User PC and the CDD-880:
• If the Management IP Address of the unit is still not known , type “ info ” at the CDD-880
Serial Interface ‘
CDD-880>’
command prompt and record the displayed information.
Alternately, use Serial Remote Control or the HTTP Interface:
o
Serial Remote Control – Type the “ <0/IPA?” remote query (without quotes) at the
CDD-880 Serial Interface CDD-880> command prompt. The unit returns the
configured Management IP Address:
>0000/IPA=192.168.1.11/24 (default)
o
CDD-880 HTTP Interface – View the
IP Address/CIDR Mask
entry on the
‘ Configuration | Interface | Ethernet ’ page: