Comtech EF Data CDD-880, Инструкция по установке и эксплуатации

Страница: 99 / 234

CDD-880 Multi Receiver Router MN-CDD880
Ethernet-based Remote Product Management Revision 2
6–29
Column Description
Index This is the read-only internal index number for the ARP entry. This number increments or
decrements automatically as you add or delete entries.
IP Entry IP Address, format XXX.XXX.XXX.XXX.
MAC Entry MAC Address, format YY:YY:YY:YY:YY.
Type The read-only entry Type is listed here as Static or Dynamic and cannot be edited.
Click [Submit Changes] to save.
6.3.3.3.3 Configuration | Network | Assoc. CTOG
Use this page to configure the CTOG-250 that is associated with this CDD-880.
Figure 6-17. Configuration | Network | Assoc. CTOG Page
Associated CTOG-250
•
Static CTOG-250 IP – Enter the desired static IP Address in the form xxx.xxx.xxx.xxx. You
must specify this address when there is more than one CTOG-250 in the same hub-side
network, and the system is running in BPM mode. These fields allow you to specify the
CTOG-250, using its Management IP Address, which contains the same outbound remotes as
the remotes being received by this CDD-880.
When you use a Static CTOG-250 IP of 0.0.0.0 , the CDD-880 will populate the Dynamic
CTOG-250 IP with the first CTOG-250 that is encountered.
When you provide a Static CTOG-250 IP, this overrides the Dynamic CTOG-250 IP.
Click
[Submit]
to save.